Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Beverly Hills
Chimney repair in Beverly Hills is rarely about heavy creosote. It’s about masonry. The grand Spanish Colonial and Tudor revival estates in the Flats and the hills above Sunset often light their fireplaces just a few nights a year, so the chimney’s real enemies are cracked crowns, failed flashing, and dry-season nests rather than soot. When something goes wrong, you want a repair that protects the flue, the firebox, and the ornate surround that sits in front of it. Call (855) 531-2802 for a free estimate, and we’ll route a vetted local crew to your property. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Beverly Hills Homeowners Call Chimney Sweep Pacific Palisades for Chimney Repair
We connect Beverly Hills homeowners with independent local professionals who work on the full chimney system: sweep, liner, crown, cap, and firebox. Nothing gets referred out mid-job. That matters on a big estate where a repointing crew, a relining crew, and a cap crew would otherwise each need their own visit through your gates.
The local pros in our network are licensed and insured as the state requires, and every visit starts with inspection. We inspect first and recommend second, so the repair plan rests on camera footage you can look at yourself rather than a guess from the driveway. Our technicians have up to 11 years of experience working on masonry and architectural chimneys, and they know that in a house like this the fireplace is a design statement first and a heating appliance second.
Response times to Beverly Hills are short. Homes near the Beverly Hills Hotel, along Rodeo Drive, and up Coldwater Canyon sit inside our dispatch routes, so scheduling is straightforward once you call.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Beverly Hills
Chimney Waterproofing in Beverly Hills
Waterproofing matters more here than in most places, because a chimney that barely burns never gets the heat that would dry it out after a rain. Sealing the masonry keeps water from soaking into brick and mortar that has no fire to bake it back. We specify breathable vapor-permeable products so trapped moisture can still escape, and we apply them to the full stack from the crown down.
Flashing Repair in Beverly Hills
Clay-tile rooflines pull away from flashing over time, and that’s where a lot of Beverly Hills water damage starts. Flashing seals the joint between the chimney and the roof, and when it lifts or cracks, rain runs straight down the outside of the flue and into the attic. We rebuild the flashing around the tile profile of the original roof so it drains the way it was meant to.
Tuckpointing in Beverly Hills
Tuckpointing is the careful replacement of weathered mortar in a joint, matched to the color, texture, and profile of the original. On a 1920s or 1930s Tudor revival estate, a grey slab of modern mortar against old lime mortar stands out from the street. We color-match the mix so the repair blends in.
Chimney Rebuilding in Beverly Hills
When a stack is failing above the roofline, rebuilding the upper courses is often cheaper and safer than tearing the whole thing down. We remove the unstable brick, rebuild on sound masonry, and recrown the top. The rest of the chimney stays intact, along with the plaster and surround below.
Our full Chimney Repair service covers inspection, crown and cap work, firebox repair, and relining when a flue has failed.
Trusted Brands We Service in Beverly Hills
The local professionals we connect you with work with professional-grade chimney brands, not hardware-store substitutes. That includes HeatShield for ceramic flue resurfacing, Gelco chimney covers, Olympia Chimney components, and Famco venting products. These are materials specified by certified chimney professionals for a reason: they hold up on a house where the chimney has to last another century. When a liner has to be replaced rather than resurfaced, we source professional stainless systems sized to the original flue. We don’t stock parts on a truck; every component is ordered to the job and delivered for the install.
Common Chimney Repair Problems We See in Beverly Hills Homes
Beverly Hills chimney work is dominated by prestige homes where the fireplace is a design statement. The living rooms are grand, the masonry fireplaces oversized, and many of them are used only a few nights a year. That low-use pattern creates a different set of problems than steady burning does. The real risk here is structural, not soot: neglected, cracked flues, failed crowns, and animals that have moved into uncapped chimney tops.
The Mediterranean climate is the other factor. Fireplaces see light, occasional winter use rather than steady burning, so creosote buildup is usually modest. The larger local issues are dry-season debris, birds and squirrels nesting in uncapped flues, and wind-driven leaves and ash from the canyon edges and hillside trees. Hillside chimneys in particular routinely draw wildlife that nests during the long dry season, so a fall visit often turns into nest removal and cap-fitting before the first cool night anyone actually lights a fire. In our experience, a sweep in Beverly Hills is as much an inspection and documentation job as a cleaning job.
- Cracked crowns and failed flashing on clay-tile rooflines. Rain gets into masonry that sees almost no fire to dry it out, and that drives spalling brick around the stack. It also soaks the attic below.
- Uncapped flues collecting squirrel and bird nests over the dry season. The problem usually surfaces only when an owner tries the first fire of the year and the chimney won’t draft. A camera inspection finds it before the smoke does.
- Original clay-tile flue liners cracking or separating at the joints. In 1920s and 1930s estates these defects are invisible without a Level 2 camera inspection and often get mistaken for a cleaning problem.
- Spalling brick at the shoulders of the stack. Freeze-free winters still let water work into the mortar joints, and a weakened joint lets the brick face flake off. Tuckpointing and repointing with a color-matched mix restore the surface.
Here’s how a typical job goes on a 1920s Spanish Colonial or Tudor revival estate in Beverly Hills. A chimney that has gone unswept for years usually shows its problem at the crown and firebox rather than the flue. Hairline cracks in the crown let winter rain soak the masonry, the flashing pulls away from the clay-tile roofline, and spalling brick appears at the shoulders of the stack. A qualified local pro runs a Level 2 inspection with a camera, clears any dry-season nest from the uncapped flue, repoints or tuckpoints the mortar joints with a color-matched mix, and reseals the crown and flashing, all while protective drop cloths stay over the ornate surround and plaster. Where a cracked flue liner turns up, a HeatShield ceramic resurfacing or stainless liner is sized to the original flue rather than rebuilding the whole stack. That’s the material side of the work: professional-grade components, made to fit the chimney that’s already there.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Beverly Hills, CA
Chimney repair pricing in Beverly Hills reflects both the trade and the property. Expect to pay more than you would for the same scope on a modest single-story house, because access, decorative materials, and careful interior protection all add time. The written estimate is what sets the final price. Here are typical estimates for common jobs here:
| Repair | Typical estimate |
|---|---|
| Mortar repointing / tuckpointing (upper stack) | $450 – $1,200 |
| Spalling brick repair | $600 – $2,500 |
| Chimney waterproofing (full stack) | $400 – $1,000 |
| Flashing repair | $350 – $900 |
| Chimney crown rebuild | $600 – $1,800 |
| Partial chimney rebuild (above roofline) | $2,500 – $8,000 |
| Level 2 camera inspection | $250 – $500 |
None of this is guesswork. Every repair starts with a camera inspection and a photo report you can review before anything is booked, and nothing gets recommended that the footage doesn’t support. The estimate is free. Call (855) 531-2802 and we’ll get a local pro scheduled to look at it.
We Also Serve Cities Near Beverly Hills
We connect homeowners around the westside with chimney repair and inspection, and the same vetted local professionals cover homes near Beverly Hills, along with West Hollywood, Westwood, Culver City, and Brentwood. If your house sits on the edge of any of these, scheduling is the same process: call, book the inspection, then the repair.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Beverly Hills
We book the inspection first and coordinate access through estate managers, property managers, and designers before any work is scheduled. That first visit is diagnostic only: a Level 2 camera inspection and a written photo report, with no repair booked until you’ve reviewed it. From there, repairs are scheduled with protective drop cloths over the ornate surround, plaster, and any nearby art, and we communicate with whoever manages the house so nobody gets surprised by a crew. Call (855) 531-2802 to start the process.
Beverly Hills sits inside our dispatch routes, so scheduling is quick, and same-day appointments are often possible. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 531-2802 and we’ll tell you what’s open.
Yes. The local professionals we connect you with cover homes across the Flats, the hills above Sunset, and properties near Rodeo Drive and the Beverly Hills Hotel. That includes the wider zip code 90212. Call (855) 531-2802 to confirm your address.
Often it can be resurfaced. HeatShield is a ceramic flue resurfacing system that repairs a cracked or worn flue from the inside without a full liner replacement, when the camera inspection shows the condition qualifies. If the flue is too far gone, a stainless liner sized to the original flue is the alternative. We won’t recommend either until the footage shows the defect. Call (855) 531-2802 for an inspection and estimate.
Skipping structural repairs like a cracked crown or failed flashing lets water keep soaking the masonry, and the damage grows. A cracked flue also means the fire isn’t contained the way it should be. Sometimes a repair can safely wait a season, and we’ll tell you when it can. When it can’t, that’s worth knowing before the first fire of the year. Call (855) 531-2802 for a free estimate.
Book Your Beverly Hills Chimney Repair
If your Beverly Hills home has an uncapped flue, a spalling stack, or a crown that’s been letting rain in, the safest move is a camera inspection and a photo report. That report is what tells you whether the repair is a repointing job or something bigger, and it’s what you’ll have in hand before any work is booked. The estimate is free. Call (855) 531-2802. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Pacific Palisades.