Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Pacific Palisades Homeowners
The cap and crown are the two parts of your chimney that take the most weather and get the least attention. A cracked crown lets water into the masonry at the top of the stack, and a missing or rusted-through cap lets rain, birds, and debris straight down the flue. By the time a homeowner notices a stain on the ceiling or a smell coming from the firebox, the damage has usually been working for a while. We inspect before we recommend anything, and we show you the photos so you can see the problem for yourself. Our technicians have up to 11 years of experience, and we handle the full chimney system here in Pacific Palisades, from the sweep to the cap. Call (855) 531-2802. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Same-day visits are often possible, and the estimate is free before any work begins.
What Our Chimney Cap & Crown Service Includes
Cap and crown work covers the whole top of the chimney: the concrete crown that caps the masonry, the screen and lid assembly that sits on top of the flue, and the fit between them. We install and repair all of it with professional-grade components, not hardware-store substitutes.
Cap Installation
A chimney cap is the lid and spark screen that sits over the flue opening. You need one if your chimney is open at the top, which lets rain in, gives birds and squirrels a way into the flue, and lets sparks land on the roof. We measure the flue, fit a cap sized to the opening, and anchor it so wind doesn’t lift it off. Where the flue is an unusual shape or the chimney has more than one opening, the cap is built to match.

Cap Replacement
Replacement is for a cap that’s rusted through, bent, missing its screen, or starting to come loose at the fasteners. A failing cap is a small problem that quietly turns into a water problem inside the chimney. We pull the old unit, check the flue tile and crown underneath for damage the old cap was hiding, and set a new cap that fits the opening correctly. Gelco chimney covers are one of the lines we work with for this.

Crown Repair
The crown is the concrete slab at the very top of the masonry that sheds water away from the stack. You need repair when it’s cracked, crumbling, or has pulled away from the flue, because a failing crown directs water into the brick and the interior of the chimney instead of off the sides. We repair the crown with a proper mortar mix shaped to shed water, and we rebuild the sections that are too far gone to patch.

Crown Coating
Crown coating is a protective layer applied over a crown that’s sound but showing surface wear. It’s worth doing when the concrete is intact but porous or starting to weather, before cracks open up. We coat the crown to keep water from soaking into the concrete, without hiding deterioration that needs a real repair.
Multi-Flue Cap
A multi-flue cap covers a chimney with more than one flue in a single unit, common on larger Pacific Palisades homes with a fireplace plus a furnace or water heater flue. You need one when a single-flue cap leaves part of the chimney open, or when several small caps have rusted and come loose. We build the cap to span the whole top, with screens over each flue opening.
Custom Cap
A custom cap is made to fit a chimney that standard sizes won’t cover, whether that’s a wide masonry top, an irregular flue, or a look the homeowner wants to match the house. You need one when an off-the-shelf cap fits poorly and rattles or leaks around the edges. We take measurements at the chimney and have the cap built to those dimensions.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We work with professional-tier chimney brands, the materials that certified chimney professionals use. Olympia Chimney covers and caps are one of the lines we install and service often, and we know where those units wear: the fasteners, the screen, and the seal where the lid meets the flue. Famco venting products show up regularly on the venting side of a chimney, and we work with them when a cap or top assembly has to integrate with a vent. Knowing how these components are built means we can tell you whether a repair is realistic or whether the part has reached the end of its service life.
Copperfield components and DuraFlex liner systems round out the roster, and both matter at the top of a chimney. A cap or crown problem often turns out to involve the flue liner below it, and a DuraFlex system is the professional standard for relining. Whether your chimney has Olympia Chimney, Famco, or any other make, we can help. Tell us what’s up there and we’ll take a look.
Signs You Need Chimney Cap & Crown Right Now
Some of these are visible from the ground. Others show up inside the house. Either way, they’re worth checking rather than waiting on.
- Water stains on the ceiling or chimney breast. A dark ring or damp patch near the chimney usually means water is getting past the crown or the cap. The longer it runs, the further into the masonry the moisture travels.
- A missing or rusted cap. If the cap is gone, bent, or rusted through, rain goes straight down the flue and birds can nest inside. A rusted cap also stops doing its spark-arresting job.
- Cracked or flaking crown. Visible cracks in the concrete top, or pieces flaking off, mean the crown is no longer shedding water the way it should. Small cracks grow with each wet season.
- Debris or animals in the firebox. Twigs, nesting material, or the sound of birds in the chimney points to an open or failed cap. A blocked flue is a real safety concern, not just a nuisance.
- Rust on the damper or a smoky smell. Rust and a damp smell around the damper are signs moisture is entering from the top. That moisture damages the damper and the liner over time.
Our Chimney Cap & Crown Process – Step by Step
We don’t quote a cap and crown job from the driveway. Every one starts with an inspection.
- 1
Inspection and photos. We look at the crown, the cap, the flue tile, and the flashing, and we take photos at each stage. You see what we see before we recommend anything. If you’d rather start with a look-and-report visit on its own, book our chimney inspection.
- 2
Diagnosis and honest recommendation. We tell you what’s actually failing and what can safely wait. A hairline crack in a sound crown may not need anything more than coating. A crown that’s separated from the flue doesn’t get patched and called done.
- 3
Written estimate. You get the scope and the price in writing, with the parts named. Nothing starts until you agree. The estimate is free.
- 4
Installation or repair. Caps are set and anchored, crowns are rebuilt or coated, and custom and multi-flue caps are fitted to measurements taken at the chimney. We use professional-grade components throughout.
- 5
Final check and walk-through. We confirm the cap sits level and the crown drains correctly, then walk you through the finished work. If something below the top of the chimney turns up during the job, you hear about it before any extra work happens.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Pacific Palisades?
Pricing at the top of a chimney depends mostly on what’s up there and how much access the work needs. A new single-flue cap is usually the smaller of the jobs. Crown repair, custom fabrication, and multi-flue covers take more time and material, so they run higher. We give you the range in your free estimate, and the written estimate sets the final price.
- Cap installation or replacement: a single-flue cap is typically the entry-level job. The cost moves with the flue size and whether the cap is standard or custom.
- Crown repair: priced by the amount of crown that needs rebuilding and the condition of the masonry under it.
- Crown coating: the smallest job of the group, appropriate only when the crown is sound.
- Multi-flue and custom caps: quoted per chimney, sized to the top.
The biggest factor is what the inspection finds. If the crown is hiding a cracked flue tile, that changes the picture, and we’ll tell you plainly. You avoid overpaying by getting the inspection first and by asking for photos. A quote for cap and crown work without a look at the chimney is a guess. The written estimate is free, and it covers exactly what we recommend and why. Call (855) 531-2802 for an exact quote.
Chimney Cap & Crown Near Pacific Palisades – Our Service Area
We work across Pacific Palisades and the neighborhoods around it, including Santa Monica, Brentwood, Westwood, Venice, Topanga, Mar Vista, Marina del Rey, Beverly Hills, Encino, Culver City, and Tarzana. If you’re outside that list, call and we’ll tell you honestly whether we cover your address. For the same cap and crown service across the hill, see our chimney cap & crown page for Brentwood, and for the full-system sweep visit Chimney Sweep Pacific Palisades. Caps and crowns pair with a clean flue, so many homeowners book the sweep and the top-of-chimney work together.
Serving Pacific Palisades, CA – Our Local Coverage Area
We serve Pacific Palisades and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Pacific Palisades
The cap is the lid and spark screen over the top of the flue, and the crown is the concrete slab at the top of the masonry that sheds water off the chimney. The cap keeps rain, animals, and debris out of the flue; the crown keeps water out of the brick and the interior of the stack. Together they protect the whole chimney from the weather, which is why we look at both in the same visit.
Most cap installations and crown repairs are finished in a single visit. A straightforward cap swap takes less time than a crown rebuild, and custom or multi-flue caps take longer because they’re measured and fitted. We’ll tell you the expected time when we give you the estimate, so you can plan around it. If anything turns up that changes the scope, we stop and talk to you first.
It depends on the job. A single-flue cap is typically the smallest cost, while crown repair and custom caps run higher because they involve masonry work and fitting. The estimate is free and comes with the scope in writing. Call (855) 531-2802 for an exact quote.
Yes. We install and service Olympia Chimney covers and caps, Famco venting products, DuraFlex liner systems, and Copperfield components. Knowing these brands matters because we can tell you where a unit is likely to wear and whether a repair makes sense. Whether your chimney has one of these makes or another, we can help.
Same-day visits are often possible, and we’ll tell you on the call whether we can make it that day. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We stand behind the work and the materials we install. The exact terms depend on the part and the job, so we go over them with you in the written estimate before you agree to anything. Ask us during the estimate and we’ll spell out what’s covered. There’s no pressure to decide on the spot.
You don’t need to do much. Clear a path to the fireplace and the chimney access if there is one, and let us know if there are pets or anything fragile nearby. If you have a chimney cap or crown you’ve already bought, have it ready for us to look at. Otherwise, we bring what the job needs and handle the rest.
Schedule Your Chimney Cap & Crown Service in Pacific Palisades Today
If your cap is missing or your crown is cracked, the fix is usually simpler than the damage it prevents. We inspect first, show you the photos, and give you a written estimate before any work starts. Call (855) 531-2802 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Pacific Palisades.