Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Pacific Palisades Homeowners
A fireplace that smokes into the room, a damper that won’t close, or a pilot that won’t stay lit are the problems we hear about most in Pacific Palisades. We repair the whole firebox assembly, not just the visible parts, so the fix holds through the burn season and the structure stays sound. Our technicians have up to 11 years of experience with the full chimney system, and we inspect first and recommend second so you know exactly what’s wrong before anyone talks about repair. Same-day service is often available in Pacific Palisades when you call (855) 531-2802. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Fireplace Repair Service Includes
Every repair starts with a look at how the fireplace actually performs: draft, seal, firebox condition, damper travel and the flue above it. That tells us whether the problem is local to the firebox or part of a larger chimney issue. Here’s what each type of repair covers.
Gas Fireplace Repair
Gas fireplaces fail in predictable ways: the burner won’t light, the flame burns unevenly, the logs get soot on one side, or the unit shuts itself off. These symptoms point to a blocked burner port, a draft problem, or a component that needs replacing. We diagnose the gas assembly and the venting together, because a gas fireplace that looks fine but vents poorly is a real safety concern. We work with Famco venting components where the venting is part of the problem.

Wood Burning Fireplace Repair
A wood fireplace that smokes, burns sluggishly, or leaves creosote faster than it should usually has a draft or firebox problem behind it. We check the smoke chamber, the damper, and the firebox walls for cracks or gaps that pull the draft off. Then we repair the source instead of masking it, so the fireplace draws the way it’s supposed to and burns more cleanly.

Fireplace Insert Service
Inserts sit inside an existing firebox and rely on their own connection to the flue, so a loose or worn connection is a common cause of poor performance and smoke spillage. We service inserts by checking the flue connection, the surround seal, and the insert’s own venting path. When the flue behind an insert is worn, we can reline it with a DuraFlex flexible liner so the insert performs to its rating.

Damper Repair
The damper is the metal plate that opens and closes the flue, and when it sticks, won’t seal, or has rusted through, you lose control of the fire and the heat. A damper that won’t close lets warm air escape and cold air in when the fireplace is idle. We repair or replace dampers so they open and close smoothly and seal properly, which matters for both efficiency and safety.
Firebox Repair
The firebox takes the direct heat of every fire, and over time the mortar joints and brick or refractory panels can crack and spall. Cracks in the firebox let heat and gases reach parts of the structure that were never meant to see them. We repair firebox damage with HeatShield ceramic resurfacing where conditions allow, which restores the flue surface without a full liner replacement, and we replace damaged panels when the damage is too deep to resurface.
Pilot Light Repair
A gas fireplace pilot that won’t stay lit is usually a sign of a dirty orifice, a thermocouple or thermopile that’s failed, or a gas supply issue. It’s a small component, but it’s the one that keeps the whole unit safe and working. We test the pilot assembly and the safety shutoff, then repair or replace the failed part so the fireplace lights reliably and safely.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with professional-grade chimney and fireplace components, the kind you won’t find on a big-box shelf. DuraFlex flexible liner systems are the professional standard for relining aging flues, and we install and service them when a fireplace’s performance problem traces back to the flue. HeatShield ceramic resurfacing lets us repair a worn flue surface without a full reline when the chimney qualifies, and we apply it to fireboxes and flues where it makes sense.
Olympia Chimney and Copperfield components round out the work: Olympia for venting and liner components, Copperfield for the parts that keep a fireplace assembly sound. We know where each of these wears out and what it takes to bring an older fireplace back to safe performance. Whether you have DuraFlex, HeatShield, Olympia Chimney, Copperfield, or any other make, we can help.
Signs You Need Fireplace Repair Right Now
- Smoke coming into the room. Smoke spilling back into the living space usually means a draft or damper problem, not just a dirty chimney. It can also signal a firebox or flue issue that needs a closer look before the next fire.
- A damper that won’t open or close. A stuck damper makes the fireplace hard to control and can leave the flue open when it shouldn’t be. It’s a small repair that protects both efficiency and safety.
- Cracks or crumbling in the firebox. Visible cracks, loose mortar, or spalling brick let heat reach the structure around the firebox. That’s a repair to make before the next burn, not after.
- A pilot that won’t stay lit. A gas fireplace that won’t hold a pilot is unreliable and can be unsafe if the safety shutoff is failing. It’s worth a diagnostic visit to pin down the cause.
- Soot, stains, or a strong odor. Dark stains on the firebox or surround, or a persistent smell when the fireplace is off, point to venting or combustion problems. These usually need a repair plus a check of the flue.
Our Fireplace Repair Process – Step by Step
- 1
Diagnostic inspection. We start with a full look at the fireplace and the flue above it, using a camera to see parts of the flue you can’t reach by eye. The inspection is a standalone diagnostic, so you get real answers before any repair is discussed.
- 2
Written findings. We explain what we found, what it means for safety and performance, and what your options are. If a repair can safely wait, we say so. You’ll see the camera evidence yourself.
- 3
Written estimate. You get a flat-price estimate for the agreed scope before we book the work. The written estimate sets the final price, and there are no surprises added on.
- 4
The repair. We repair the firebox, damper, insert connection, pilot assembly, or flue as needed, using professional-grade components like DuraFlex, HeatShield, Olympia Chimney, and Copperfield. The work is built to last, not patched to pass.
- 5
Performance check and walkthrough. We test the fireplace after the repair, confirm the draft and seal are right, and walk you through what was done. If a liner or crown issue turns up, we can handle it under the same full-system service.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Pacific Palisades?
Most fireplace repairs in Pacific Palisades fall between about $150 and $900 depending on what’s wrong and which components are involved. A pilot light repair or damper adjustment usually sits at the low end of that range, while firebox resurfacing or insert connection work runs higher. When a repair turns into flue work, a reline with DuraFlex can push the total up, but we only recommend that when the flue actually calls for it. A typical firebox resurfacing with HeatShield in Pacific Palisades runs higher than a simple damper fix, and the estimate spells out which is which.
What affects the price: the type of fireplace (gas versus wood), how deep the damage goes, whether the flue needs work along with the firebox, and the components required. To avoid overpaying, get the diagnosis in writing with camera evidence, and ask whether a repair can safely wait. Our estimates are free and set per job, so the written estimate is the final price. Nothing is recommended without evidence you can see for yourself.
Fireplace Repair Near Pacific Palisades – Our Service Area
We serve Pacific Palisades and the surrounding communities, including Santa Monica, Brentwood, Westwood, Venice, Topanga, Mar Vista, Marina del Rey, Beverly Hills, Encino, Culver City, and Tarzana. When you need a chimney sweep in Pacific Palisades alongside your fireplace repair, we can book both in one visit. We also offer a standalone fireplace repair diagnostic when you just want answers, and our fireplace repair and fireplace repair teams cover those nearby cities as well. Response times depend on the day, so call to check availability.
Serving Pacific Palisades, CA – Our Local Coverage Area
We serve Pacific Palisades and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Pacific Palisades
Fireplace repair is the work of fixing the components that make a fireplace burn and vent correctly: the firebox, damper, insert connection, pilot assembly, and the flue behind them. It’s different from a sweep, which cleans the chimney, because repair addresses damage and performance problems. We treat the whole system together so a fix in the firebox doesn’t leave a flue issue behind. Call (855) 531-2802 for an exact quote – estimates are free.
Most fireplace repairs are completed in a single visit, though firebox resurfacing or insert work can take longer depending on the damage. A pilot or damper repair typically goes quickly, while flue work adds time. We’ll tell you the expected timeline when we give you the written estimate, so you’re not guessing. Call (855) 531-2802 for an exact quote – estimates are free.
Fireplace repair in Pacific Palisades typically runs about $150 to $900, with the final figure set by the written estimate based on the repair scope. Simple component fixes sit at the low end, and firebox resurfacing or insert work runs higher. We give you the price before we book the work. Call (855) 531-2802 for an exact quote – estimates are free.
Yes. We install and service DuraFlex flexible liner systems and apply HeatShield ceramic resurfacing where a chimney qualifies. We also work with Olympia Chimney, Copperfield, and Famco components, so most fireplace makes are covered. If your fireplace has one of these systems, tell us when you call so we bring the right approach. Call (855) 531-2802 for an exact quote – estimates are free.
Same-day service is often available in Pacific Palisades depending on the day’s schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 531-2802 to check availability.
We stand behind the work with a satisfaction guarantee, and we’ll explain what’s covered on your repair when we give you the estimate. The written estimate spells out the scope and the guarantee so you know what to expect. If something isn’t right after the repair, call us and we’ll make it right. Call (855) 531-2802 for an exact quote – estimates are free.
Clear the area around the fireplace and remove anything flammable from the hearth before we arrive, and don’t burn a fire on the day of the visit. If you have a gas fireplace, know where the gas shutoff is so we can work safely. Have your questions ready, and we’ll walk you through the findings and the estimate. Call (855) 531-2802 for an exact quote – estimates are free.
Schedule Your Fireplace Repair Service in Pacific Palisades Today
Don’t let a smoking fireplace, a stuck damper, or a firebox crack wait through the season. Call (855) 531-2802 to book a diagnostic, and we’ll inspect first, recommend second, and give you a no-obligation written estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Repair built to last, not patched to pass.
Written by the team at Chimney Sweep Pacific Palisades.