Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Westchester
If your Westchester chimney cap is rusted through or your crown is shedding pieces onto the roof, we can help. Chimney Sweep Pacific Palisades installs and repairs caps and crowns for homeowners across this coastal LA neighborhood, from the tracts east of Lincoln Boulevard up toward the hillside streets near the airport. Our technicians have up to 11 years of experience, and they know how salt air and marine-layer damp treat a chimney here. Call (855) 531-2802. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written quote sets the final price.
Why Westchester Homeowners Call Chimney Sweep Pacific Palisades for Chimney Cap & Crown
Most of the calls we take in Westchester start the same way: a homeowner noticed rust streaks down the cap, or a chunk of crown on the driveway after a windy night, and wants to know whether it’s serious. We inspect first and recommend second. Nothing gets quoted until we’ve run a camera down the flue and shown you what it found.
That approach matters in older neighborhoods because cap and crown problems here rarely sit alone. A cracked crown lets water into the clay tile flue, and a rusted cap lets it in from the top. Fix just the visible piece and the moisture keeps working from the other end. We handle cap and crown as part of the chimney cap & crown side of the full chimney system, so the liner, damper and firebox get checked in the same visit.
Our technicians work with professional-grade components from DuraFlex, Olympia Chimney, Copperfield and similar brands. We don’t source from hardware-store bins, and we don’t claim to stock parts locally. What we do is measure the flue, specify the right cap and material for a salt-air environment, and schedule the install.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Westchester
Cap and crown work on a Westchester home usually comes down to four jobs. Which one you need depends on what the camera and a close look at the masonry show.
Cap Installation
A new cap keeps rain, birds and squirrels out of the flue and sparks off the roof. On Westchester’s mid-century homes, the flue opening is often an odd size, so we measure before ordering rather than forcing a standard cap to fit. Stainless steel holds up far better to coastal salt air than the galvanized caps many of these roofs still carry.

Cap Replacement
Galvanized caps in Westchester corrode from the inside out, and the rust is usually worse than it looks from the ground. A cap replacement means pulling the old unit, checking the flue tile for cracks underneath, and setting a properly sized stainless cap with a screen that won’t tear out. If the damper below is rusted shut, we flag that in the same visit instead of leaving it for later.

Crown Repair
The masonry crown is the sloped cap of concrete or mortar at the top of the chimney, and it’s what sheds water away from the flue. On 1940s and 1950s tract homes around Westchester, those original crowns crack and spall as marine-layer moisture works in and out of the masonry. We repair the damaged sections and rebuild the slope so water runs off rather than pooling against the tile.

Crown Coating
When a crown has hairline cracks but the structure is still sound, a flexible crown coating can seal it without a full rebuild. Coating only works on a crown that’s been properly prepped, so we wire-brush and prime first. This is a common fix on Westchester chimneys that see a handful of decorative gas fires a year and little else.
We also install multi-flue caps and custom caps for chimneys with irregular openings or more than one flue sharing a crown.
Trusted Brands We Service in Westchester
We work with professional-tier chimney brands: DuraFlex liner systems, Olympia Chimney caps and components, Copperfield, Famco venting products, Gelco covers and HeatShield flue resurfacing. These are the materials chimney professionals specify, not the substitutes sold at big-box stores. We don’t claim to keep them in stock locally, so lead time on a custom cap depends on the order, and we’ll tell you the timeline before you commit. For most Westchester cap and crown jobs, the products arrive sized to your flue and we schedule the install once they’re in hand.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Westchester Homes
The failure pattern here is consistent, and it doesn’t match what you’d find inland.
- Salt-air corrosion eating through galvanized caps. The onshore marine air attacks the metal on a cap even when the fireplace barely runs. A chimney that never burns wood still fails from the top down because the cap is the first thing the salt air hits.
- Cracked and spalling masonry crowns on post-war tract homes. Original 1940s and 1950s crowns crack as moisture cycles in and out of the masonry, and every crack is a path for water to track down the clay tile flue.
- Rusted dampers sealed shut. Decorative gas logs and gas-ignition inserts mean little wood smoke, but the damper sitting closed for years collects corrosion and eventually won’t open. That’s a damper problem, not a chimney that needs rebuilding.
- Bird and squirrel nests blocking unused flues. With the mild climate and years between fires, nests and debris build up in flues that look fine from outside. A blocked flue can read as a cap problem when the real fix is a cleaning and a screened cap.
Pricing for Chimney Cap & Crown in Westchester, CA
A typical cap installation in Westchester runs $250 to $550, and a crown repair typically runs $350 to $900 depending on how much masonry needs rebuilding. Crown coating on a sound crown usually lands between $300 and $600, and a custom or multi-flue cap runs $450 to $900. Those ranges are estimates for this market; the written estimate sets the final price. What moves you within a range is the flue size, the cap material, roof access and whether the crown needs spot repair or a rebuild. The estimate is free, and we don’t recommend crown or liner work without camera evidence you can watch and question.
We Also Serve Cities Near Westchester
Our cap and crown work reaches the neighborhoods around Westchester too, including Mar Vista, Culver City, Marina del Rey and Venice. The same marine-layer conditions and mid-century housing stock show up across all of them, so the diagnosis approach carries over. If you’re just outside Westchester, call and we’ll confirm coverage before booking.
Serving Westchester, CA – Our Local Coverage Area
We serve Westchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Westchester
Yes. A cap keeps rain, birds and squirrels out of the flue whether or not you burn wood. In Westchester, the flues that sit unused for years are the ones that collect nests and moisture, and the cap is what stops that from the top. Call (855) 531-2802 for a free estimate.
Because hairline cracks and spalling in a masonry crown are usually invisible from the ground. On Westchester’s older chimneys, marine-layer moisture cycling opens small cracks that widen over time, and the damage shows up close up or on camera, not at a distance. Ask to see the photos before you agree to anything.
Crown coating seals hairline cracks on a structurally sound crown, while a rebuild replaces damaged masonry and restores the slope. Coating works when the crown is intact underneath; a rebuild is needed when the masonry is crumbling or the slope has failed and water pools against the flue tile. We recommend a rebuild only when the camera and a close look show it’s necessary.
Usually, yes. A rusted damper in a Westchester chimney is often a top-down corrosion issue from salt air, not a sign the whole chimney needs replacing. The fix might be a damper replacement or a top-sealing damper, but we only know after inspecting the flue. Call (855) 531-2802 and we’ll walk you through it.
If your cap is galvanized and showing rust, or it overhangs or underhangs the flue opening, it’s the wrong setup for this climate. Salt air corrodes galvanized caps faster than most homeowners expect, and a poorly fitted cap lets water and animals in regardless of material. A stainless cap sized to your actual flue is the standard fix here.
Have a cap or crown question about your Westchester home? Call (855) 531-2802 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. We inspect first, show you the camera evidence, and tell you plainly when work can safely wait.
Written by the team at Chimney Sweep Pacific Palisades.