Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Brentwood
If your chimney crown is cracked, your mortar is crumbling, or your flue is letting water into the house, we can help. We connect Brentwood homeowners with independent local chimney professionals who handle the full system: masonry repair, relining, crown rebuilds, flashing, and waterproofing. Our technicians have up to 11 years of experience, and we know how fireplaces in this part of the Westside actually age. Call (855) 531-2802 for a free estimate. We answer 24/7.
Why Brentwood Homeowners Call Chimney Sweep Pacific Palisades for Chimney Repair
Brentwood chimneys don’t fail the way flatland chimneys do. Between the canyon settling, the dry Santa Ana seasons, and the mix of 1950s ranch masonry and later prefab rebuilds, the problems here are structural and fire-safety problems first, not cosmetic ones. That’s why we lead with a diagnostic inspection instead of a sales pitch, and why we source professional-grade components – DuraFlex liners, HeatShield ceramic resurfacing, Gelco covers, Famco venting, Copperfield parts, Olympia Chimney systems – rather than hardware-store substitutes.
Homeowners in Brentwood call us because they want answers they can verify: photos from the camera inspection, a written estimate before any work starts, and straight talk about what can wait and what can’t. Our technicians have up to 11 years of experience with the kind of masonry fireplaces and prefab flue systems you find south of Sunset and along the canyon ridges. We treat every job as a full-system evaluation because a fix on the crown means nothing if the liner behind it has gaps.
Response to Brentwood is scheduled and straightforward. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. When we connect you with a local pro, the estimate is free and the price is set per job by the written estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Brentwood
We work the full chimney system. Here’s what a typical repair involves in this part of town, with the sub-services that come up most in Brentwood homes.
Mortar Repointing
Older masonry chimneys in Brentwood’s hillside ranches often have mortar joints that have washed out over decades of dry summers and winter rain. Repointing means grinding out the failed mortar and packing fresh material into the joints so the brick stops shifting. We do this before it gets to the point where the whole stack needs rebuilding.
Spalling Brick Repair
When water gets into brick and freezes or expands, the face pops off. That’s spalling, and it’s common on chimneys with a cracked crown that’s been letting water in for years. We replace the damaged brick and address the source of the moisture, not just the symptom.
Chimney Waterproofing
A breathable waterproofing treatment keeps rain out while letting masonry dry from the inside. In Brentwood this matters because summer heat bakes the masonry and winter rain hits it hard. Waterproofing after a repair is what makes the repair last.
Flashing Repair
Flashing is the metal that seals the chimney to the roof. When it pulls loose, water runs down the chimney into the attic and ceiling. We inspect the flashing at the roofline and reseal or replace it as part of the repair.
For a full rundown of what our chimney repair service covers, including crown rebuilding and relining, see that page. Inspection is its own standalone visit – you can book a diagnostic-only appointment without a sweep attached.
Trusted Brands We Service in Brentwood
We work with the professional-tier chimney brands that certified technicians use: DuraFlex flexible liner systems for aging or damaged flues, HeatShield ceramic flue resurfacing for qualifying chimneys, Gelco covers, Famco venting products, Copperfield components, and Olympia Chimney systems. These aren’t the parts you’ll find at a big-box store, and that’s the point: a repair that lasts is built from materials rated for the job. We don’t claim to stock parts on a truck. What we do is source the right component for your specific flue and get the repair done.
Common Chimney Repair Problems We See in Brentwood Homes
These are the failure modes that come up most in Brentwood, and they share one cause: dry chaparral and Santa Ana winds turn a small masonry defect into something bigger than a maintenance item.
- Cracked chimney crowns from seismic settling. The canyon ground shifts, and crowns crack. Once water gets behind the crown it works into the masonry and starts spalling brick from the inside out.
- Missing or damaged spark arrestors. Brentwood sits in the wildland-urban interface, and a spark arrestor in good condition is a wildfire-safety device here, not a decorative cap. A damaged one is a real ignition risk when the brush is dry.
- Deteriorated mortar joints in older fireplaces. The 1950s and 1970s masonry fireplaces have joints that have washed out, and that opens gaps around the flue liner. Gaps mean heat and gases where they shouldn’t be.
- Cracked crowns and missing arrestors that go unnoticed. In the narrow canyon streets off Mandeville and Sullivan Canyons, these problems often sit until a neighbor’s brush scare or an insurance inspection flags the flue. That’s why we inspect first and recommend second.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Brentwood, CA
No “it depends” without numbers. Here’s what a typical repair runs in Brentwood’s market. A typical mortar repointing job in Brentwood runs $400-$1,200, depending on how much of the stack is affected. Spalling brick repair with matching replacement brick usually lands at $600-$1,500. Chimney waterproofing runs $300-$700 for a standard masonry chimney. Flashing repair runs $250-$650. A full crown rebuild typically runs $800-$2,000, and a chimney rebuild from the roofline up can run $3,000-$8,000 depending on height and access. These are estimates – the written estimate sets the final price, and the estimate is free. Nothing is recommended without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can safely wait.
We Also Serve Cities Near Brentwood
We serve homeowners throughout Brentwood and the neighboring Westside communities, including Westwood, Santa Monica, Pacific Palisades, and Beverly Hills. Canyon access and hillside setbacks change how a job is scheduled, and we account for that when we book. If you’re just over the ridge from Brentwood, we can help.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Brentwood
Because Brentwood sits in the Santa Monica Mountains’ wildland-urban interface, where dry chaparral and Santa Ana winds make creosote buildup and a bad spark arrestor a genuine wildfire risk rather than a routine item. A cracked crown or missing arrestor that would be cosmetic in a flatland neighborhood can be an ignition source here. Call (855) 531-2802 for an exact estimate – estimates are free.
If you burn wood regularly, an annual inspection is the right interval, and heavy burners should treat it as a fire-safety check, not a cleaning. In Brentwood, where many fireplaces were built for ambiance but get used far more, the annual visit catches crown cracks and liner gaps before they turn into water damage. Call (855) 531-2802 to book a diagnostic visit.
A visible crack across the top of the crown, crumbling masonry at the crown edge, or rust streaks and water staining on the chimney face all point to a failing crown. If you’re seeing spalling brick below the crown line, water has likely been getting in for a while. Call (855) 531-2802 for a free estimate.
We handle both. Brentwood has a real mix: older masonry chimneys that may need relining, and later rebuilds with prefab metal flue systems that need factory-part inspection and component-level repair. The diagnostic inspection tells us which system you have and what it needs. Call (855) 531-2802 for an exact quote.
Yes, and specifically because of the dry-hot-summer, wet-winter pattern here. Waterproofing keeps rain out of the masonry while letting it dry from the inside, which is what stops spalling and slows mortar failure. It’s most effective right after a repair, when the masonry is sound. Call (855) 531-2802 – estimates are free.
Contact Us for Chimney Repair in Brentwood
If your crown is cracked, your flashing is loose, or your liner has gaps, don’t wait for the next brush scare or insurance inspection to flag it. We connect Brentwood homeowners with vetted local chimney professionals who inspect first and recommend second. Call (855) 531-2802 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday; closed Saturday. Every repair is priced per job by the written estimate, and nothing is recommended without camera evidence you can see for yourself.
Written by the team at Chimney Sweep Pacific Palisades.