Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Pacific Palisades
If you’ve been putting off a chimney sweep because the last quote felt like a sales pitch, you’re not alone. In Pacific Palisades, the real work isn’t just brushing out soot – it’s understanding what your flue is actually made of and whether it’s safe to burn in. After the 2025 Palisades Fire, that question matters more than ever. Our technicians have up to 11 years of experience with the mid-century masonry chimneys and clay-tile flues common on these hillside lots. Call (855) 531-2802 to book a sweep.
Why Pacific Palisades Homeowners Call Chimney Sweep Pacific Palisades for Chimney Sweep
Most Pacific Palisades chimneys sit in ranch and traditional two-story homes built between the 1950s and 1970s, and those stacks have their own habits. The ocean-facing slopes collect damp that eats at mortar joints and rusts dampers. The warmer inland-side lots collect dry, flaky creosote that lights off fast when the Santa Anas come through. A sweep who treats every chimney the same is guessing.
We don’t. Our approach in Pacific Palisades is inspect first, recommend second. Nothing gets suggested – no liner, no crown rebuild, no damper swap – until you’ve seen the camera images yourself. That’s the whole point. If your flue is fine, we say so and clean it. If it isn’t, you’ll see exactly why before anyone quotes a number.
Homeowners across Pacific Palisades call us because we handle the full chimney system: sweep, liner, crown, cap, firebox. No referrals out, no scope gaps. When we’re working through the winding streets off Palisades Drive or the Alphabet Streets, we schedule around how each canyon block actually behaves. Ocean side, that means more rust and spalling checks. Inland side, that means more careful creosote removal before fire season.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Pacific Palisades
Level 1 Inspection
A Level 1 inspection covers the readily accessible parts of the chimney and firebox, and it’s what most Pacific Palisades homeowners need for a routine annual check. We look at the firebox, damper, smoke chamber transition, and visible flue. If anything looks off, we don’t guess – we recommend stepping up to a Level 2 with camera. You can book a Level 1 as its own diagnostic visit, separate from a cleaning, if you just want eyes on the system.

Level 2 Inspection
A Level 2 inspection runs a camera through the flue, and in Pacific Palisades it’s often the difference between a real answer and a sales pitch. Mid-century clay-tile flues here frequently have eroded mortar joints and cracked tiles that you can’t see from the firebox. The camera shows you the spalling, the missing liner joints, the rough spots. We put the images on-screen and walk you through them. After the 2025 Palisades Fire, a Level 2 is also how we verify that liners and spark arrestors survived heat and ember exposure.

Creosote Removal
Creosote removal in Pacific Palisades is fire prevention, not housekeeping. The dry season and Santa Ana wind events build up creosote fast, and the flaky first-degree stage that brushes out easily on one canyon slope can look very different from the glazed third-degree buildup that doesn’t respond to a standard brush at all. We remove what a brush can reach, tell you honestly when glaze needs a different approach, and never pretend a sweep solved something it didn’t.

Soot Removal
Soot settles into the smoke chamber, the damper ledge, and the firebox walls, and on a 1950s-70s masonry fireplace it’s often compounded by a rough-parged smoke chamber that keeps causing smoke rollout even after the flue is clean. We clear soot from the full firebox and smoke chamber, not just the visible surface. If the chamber itself is the problem, you’ll see it before we talk about repair.
Trusted Brands We Service in Pacific Palisades
When a Pacific Palisades chimney needs a liner, a cover, or a component replaced, the part matters as much as the install. We work with professional-tier chimney brands including DuraFlex flexible liner systems, Olympia Chimney components, Famco venting products, Copperfield components, and Gelco chimney covers. These are the materials certified chimney professionals use, not hardware-store substitutes. We don’t claim to stock parts locally – what we do is source the right component for your flue and get it installed without a long wait. If your chimney needs a repair, we’ll tell you what part it takes and why.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Pacific Palisades Homes
- Unlined or clay-tile flues with eroded joints. Many Pacific Palisades homes still run original clay tile with mortar joints that have worn thin over decades of marine-layer damp. The camera shows it clearly – missing joints, cracked tiles, gaps where gas and heat can escape into the framing.
- Rusted dampers and rough smoke chambers. A rusted damper or a smoke chamber that was never parged smooth keeps causing smoke rollout even after a clean sweep. On 1950s-70s masonry fireplaces, this is one of the most overlooked causes of a smoky room.
- Cracked crowns and loose spark arrestors. Exterior chimney stacks on sloped lots take ember exposure and coastal damp, and crowns crack while arrestors work loose. After the 2025 Palisades Fire, this is a routine check on Pacific Palisades chimneys.
- Creosote that varies by slope. Ocean-facing chimneys collect damp, gummy buildup; inland ranch lots collect dry, flaky creosote that ignites faster during a Santa Ana event. The same 1960s flue can need a different scope on either side of the road.
Pricing for Chimney Sweep in Pacific Palisades, CA
Pricing is set per job by a written estimate, and the estimate is free. A standard sweep in Pacific Palisades typically runs $180-$320 depending on flue condition and access. A Level 1 inspection runs about $150-$250, and a Level 2 camera inspection typically runs $250-$450. Creosote removal beyond a standard sweep, or soot removal that includes the smoke chamber, adds to the base range. What moves the number: flue length, roof pitch and access on steep hillside lots, how much buildup there is, and whether the camera turns up something that needs a second look before cleaning. You’ll see the estimate in writing before any work starts.
We Also Serve Cities Near Pacific Palisades
We work with homeowners throughout Pacific Palisades and the surrounding Westside, including Santa Monica, Brentwood, Westwood, and Venice. If you’re just over the canyon or down the coast, the same inspect-first approach applies. Book a sweep through our chimney sweep service and we’ll schedule you in.
Serving Pacific Palisades, CA – Our Local Coverage Area
We serve Pacific Palisades and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Pacific Palisades
Yes. An unlined or clay-tile flue should get a Level 2 camera inspection before a cleaning, because the camera is the only way to see whether the tiles are cracked, the joints are missing, or the flue has gaps that a brush can’t reveal. On Pacific Palisades mid-century homes, that’s the difference between a clean flue and a clean flue that’s still unsafe. Call (855) 531-2802 to book a Level 2 – estimates are free.
Yes. A fireplace that sat through the evacuation and smoke events should be checked before you burn in it again, even if you haven’t lit a fire since. Smoke and ash can settle into the firebox and flue, and ember exposure can crack a crown or loosen a spark arrestor in ways you won’t see from the hearth. A Level 2 inspection verifies the liner and arrestor survived. Call (855) 531-2802 for a diagnostic visit.
You usually can’t tell from the firebox – first-degree creosote is flaky and brushes out, while third-degree glaze is hard, shiny, and won’t respond to a standard brush. The only reliable way to know is to look up the flue with a camera, which is what we do. In Pacific Palisades, the dry inland-slope creosote tends to flake and the ocean-slope buildup tends to be gummier, but the camera settles it. Call (855) 531-2802 and we’ll show you what’s actually in the flue.
It’s most likely coastal damp from the marine layer, which keeps chimneys wet and erodes mortar joints while rusting dampers and other steel parts. Pacific Palisades chimneys on the cooler, ocean-facing slopes see more of this than the warmer inland lots. The camera and a close look at the crown and joints will confirm what’s damp damage versus what needs repair. Call (855) 531-2802 for an inspection – we’ll show you what we find before recommending anything.
Yes. Many Pacific Palisades homes have been retrofitted with gas inserts, and those appliances vent into flues that were often designed for an open masonry fireplace – which can cause weak draft and a smoky room. We inspect the insert, the flue it vents into, and the firebox-to-smoke-chamber transition as part of the same visit. Call (855) 531-2802 to book.
If your chimney hasn’t been looked at since the fire, or you’ve been told you need a liner you can’t verify, start with a sweep and a camera. Nothing gets recommended until you’ve seen the images. Call (855) 531-2802 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Written by the team at Chimney Sweep Pacific Palisades.