Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Venice
If your fireplace has stopped working the way it should, we can help. Chimney Sweep Pacific Palisades handles fireplace repair across Venice, from the walk streets and canal-adjacent bungalows to the newer rebuilds closer to Abbot Kinney and the beach. Most of the homes we look at here are older masonry fireplaces that were built for ambiance, not heat, so the problems tend to be rust, moisture and nesting debris rather than heavy creosote. We’re a full-system chimney service: sweep, inspection, liner, cap, crown, firebox and damper. Call (855) 531-2802 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm.
Key Takeaways
- Venice fireplace repair is mostly a salt-air corrosion job, not a creosote job, because most fireplaces here see decorative fires only.
- Stainless dampers, caps and screens outlast galvanised parts on a stack sitting in onshore salt spray.
- A Level 2 inspection comes before any repair recommendation, and you see the camera photos yourself.
- Typical fireplace repairs in Venice run from about $150 for a damper up to $2,800 or more for full firebox and crown rebuild work.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Why Venice Homeowners Call Chimney Sweep Pacific Palisades for Fireplace Repair
We work across Venice regularly, and we know what the coastal marine layer does to a chimney that sits idle most of the year. The damp morning air, the salt-laden onshore breeze off the beach, and the low heating demand here combine to produce a very different failure pattern from what you’d see on an inland LA stack: rusted dampers, spalling brick and cracked mortar, and caps packed with palm frond debris and squirrel nesting. That’s what we’re equipped for.
Our technicians have up to 11 years of experience. We work with professional-grade chimney brands including DuraFlex liner systems, Gelco covers, Olympia Chimney components and Famco venting products, which means the repair we recommend holds up in coastal conditions instead of failing inside two years. We’re a full-system chimney specialist, so we can handle the sweep, the inspection, the cap and crown, and the firebox repair without passing you off to another provider.
We answer 24/7 and dispatch crews Sunday through Friday, 7am to 7pm, which matters if your damper jams shut on a cool Sunday morning and you want a real answer before the week starts.
Our Fireplace Repair Services in Venice
Damper Repair
Damper repair is the most common call we get in Venice. On a 1905 – 1930 bungalow, the metal damper plate is often rusted through or frozen open from years of decorative-only fires and the salt air eating at the metal. We replace the damper with a stainless unit so the fix survives the next decade of onshore spray, and we check the frame and firebox floor while the damper is out.

Firebox Repair
Older Venice fireboxes take a beating from marine moisture rather than from heat. You’ll often see a crumbling firebox floor, cracked firebrick, or mortar joints that have gone soft. We repoint and rebuild the firebox using proper refractory materials, and we can resurface a sound-but-rough flue with HeatShield ceramic resurfacing when a full reline isn’t needed.

Gas Fireplace Repair
The newer Venice rebuilds (2000s-and-later) usually have gas or prefab fireplaces rather than original masonry. Common problems we see here are a pilot that won’t stay lit, a burner with weak or uneven flame, and a gas log set that’s been sitting unused long enough to collect dust and spider webbing in the pilot assembly. We diagnose the gas train and controls and make the repair, or recommend a replacement if the unit is past its service life.

Wood Burning Fireplace Repair
Wood-burning fireplaces in Venice are typically the original masonry units, and the repair work usually centers on the firebox, damper, and crown. If your fire won’t draw properly, or you’re getting smoke into the room, we’ll do a Level 2 inspection to check the flue liner and smoke chamber before recommending anything. We also repair and reinstall chimney caps.
Fireplace Insert Service
If you’ve added a fireplace insert to an older Venice masonry fireplace, we can inspect the connection, check the flue liner, and make sure the installation meets current venting requirements. Inserts in older homes often need a proper liner upgrade to work safely.
Pilot Light Repair
Pilot light problems on gas fireplaces are usually a thermocouple, thermopile or gas valve issue. We test the pilot assembly, the gas supply, and the safety shutoff, and replace the failing component so the fireplace relights reliably. This is a common fix on Venice gas fireplaces that see only occasional use.
Trusted Brands We Service in Venice
We work with professional-grade chimney brands, not hardware-store substitutes. That includes DuraFlex flexible liner systems for relining aging flues, Gelco chimney covers for a durable cap, Olympia Chimney components for liners and caps, Copperfield for cap and crown work, and Famco venting products where they fit the job. We don’t stockpile parts locally, but our team can usually source what a Venice repair needs quickly and get it scheduled without a lot of back-and-forth. If a specific brand name is important to you, mention it when you call and we’ll confirm what’s available for your fireplace.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Venice Homes
- Rusted-through dampers and rusted cap screens. Onshore salt spray eats at galvanised metal fast, and a damper that’s been idle for years often freezes open or shut. Replacing with stainless is the only spec that makes sense on a coastal stack.
- Spalling brick and cracked mortar on the crown and firebox. The damp marine layer drives this more than heat cycling does. A soft crown lets water in, and water in the firebox is what turns a small repair into a rebuild.
- Caps packed with palm frond debris and squirrel nesting. On a chimney that only sees occasional decorative fires, the cap screen clogs faster than the flue does. That choked cap kills draft and can push smoke back into the room.
- Cracked clay tile liners on pre-1930 stacks. Decades of moisture in an unlined or spalled clay flue is a real safety concern, and code inspectors do flag it. We document with camera evidence before recommending any liner work.
Pricing for Fireplace Repair in Venice, CA
What you’ll typically pay in Venice:
- A damper replacement runs about $300 – $750, depending on whether it’s a standard top-sealing or throat damper.
- Firebox repair and repointing usually runs $600 – $1,800.
- A gas fireplace diagnostic and repair (pilot, thermocouple, valve) runs about $150 – $500.
- HeatShield ceramic flue resurfacing runs about $1,200 – $2,200.
- A full DuraFlex liner install, when the flue needs it, runs roughly $2,500 – $5,000.
Those ranges reflect what fireplace repair typically costs in Venice’s market. The written estimate sets the final price, and the estimate is free. Many Venice repairs can safely wait, and we’ll say so plainly rather than talk you into work you don’t need.
We Also Serve Cities Near Venice
We handle fireplace repair across Venice and the neighboring communities of Marina del Rey, Mar Vista, Santa Monica and Culver City. If you’re just off Abbot Kinney, in the walk streets, or over by the canals, we cover it. Our fireplace repair service is the same full-system approach wherever we go, and our team can give you a straight answer on timing when you call.
Serving Venice, CA – Our Local Coverage Area
We serve Venice and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Venice
Because the salt air, not the fire, is what kills it. Venice sits in the coastal marine layer, and onshore salt spray eats at galvanised damper metal year after year even when the fireplace goes unused. Once the metal rusts through or a damper seizes open or shut, it needs replacement with a stainless unit that can survive the coast. Call (855) 531-2802 for an exact quote – estimates are free.
Once a year, even if you rarely burn. The issue here isn’t creosote, it’s moisture, rust and nesting debris. A cap packed with palm fronds or a crown that’s gone soft will get worse quietly, and an annual inspection catches those before they turn into an expensive repair. We answer 24/7, so call (855) 531-2802 to schedule an inspection.
Usually the crown and the damper, then the liner. The damp marine layer drives mortar and metal corrosion, and the crown at the top gets the most direct salt exposure, so it spalls and cracks first. Water then travels down, and that’s when you find a cracked clay tile liner. We document it with a camera inspection before recommending any repair, and the estimate for putting it right is free when you call (855) 531-2802.
Yes. On a stack sitting in salt spray, galvanised parts can rust through in a fraction of the time stainless lasts, so swapping for stainless is the only spec that makes sense. It costs more upfront, but you avoid repeating the repair every few years. Call (855) 531-2802 for a written estimate on the stainless upgrade – free, and no pressure if the current parts have life left in them.
Yes. Newer gas and prefab fireplaces in Venice’s 2000s-and-later rebuilds have their own failure points: pilots that won’t stay lit, weak burners, and gas valves that gum up from disuse. We service these units and can recommend a replacement if the firebox is past its service life. Call (855) 531-2802 for a diagnosis – the estimate is free.
If your fireplace isn’t drawing, your damper won’t turn, or your firebox is crumbling, don’t wait on it. The salt air and marine layer don’t stop working on a Venice stack just because the fireplace sits idle. Call (855) 531-2802 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Pacific Palisades.