Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Pacific Palisades?
Chimney repair in Pacific Palisades typically runs $350 to $1,800, with most common fixes landing between $450 and $900. A crown rebuild or a new cap sits at the low end, HeatShield flue resurfacing runs $600 to $1,400, and a full DuraFlex liner installation reaches $2,500 to $6,500 depending on flue length and liner diameter. Every price below is an estimate; the written estimate you get after an inspection sets the final number.
We work on the whole chimney system here in Pacific Palisades, and that changes what a repair actually costs. A cracked crown and a failed flue liner are separate jobs with separate price tags, and quoting one without checking the other is how homeowners end up paying twice. We inspect first and recommend second. Call (855) 531-2802 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most Pacific Palisades chimney repairs fall between $350 and $1,800.
- Crown repair and cap replacement are the cheapest structural fixes; full relining is the most expensive.
- HeatShield ceramic resurfacing can replace a full liner job when the flue passes inspection, often cutting the bill by half.
- Our technicians have up to 11 years of experience and install professional-grade components from DuraFlex, HeatShield, Gelco, Famco, Olympia Chimney, and Copperfield.
- Estimates are free, and a diagnostic chimney inspection can be booked on its own, without a sweep.
Chimney Repair Cost Breakdown (2026)
Here’s what the line items look like in the Pacific Palisades market for 2026. These are estimated ranges for a typical single-family home with a masonry chimney. Your written estimate will reflect the actual condition of your flue, crown, and cap.
| Repair | Typical Price Range |
|---|---|
| Chimney inspection (diagnostic visit) | $150 – $400 |
| Chimney sweep (often paired with inspection) | $200 – $450 |
| Crown repair or patch (minor cracks) | $250 – $600 |
| Full crown rebuild | $550 – $1,400 |
| Chimney cap replacement (Gelco or similar) | $250 – $700 |
| HeatShield ceramic flue resurfacing | $600 – $1,400 |
| DuraFlex flexible liner installation | $2,500 – $6,500 |
| Firebox and damper repair | $350 – $1,200 |
| Mortar joint repointing (spot work) | $400 – $1,000 |
| Venting corrections (Famco components) | $300 – $850 |
What drives the price up or down? Three things matter most. First, height and access: a chimney that runs two stories costs more to reach than a single-story stack, and scaffolding or a ladder setup adds labor time. Second, the condition of the flue: a hairline crack that HeatShield can seal is a fraction of the cost of a liner that has fully deteriorated. Third, the material spec. We install DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield components because these are the professional-tier products certified chimney technicians specify. Hardware-store caps and generic liners cost less up front and fail sooner, which means the repair gets paid for twice.
What Affects Chimney Repair Pricing in Pacific Palisades
Pacific Palisades homes sit in the Santa Monica Mountains, and the local conditions here shape what repairs actually get done. These are the factors we see most often when we price chimney work.
- Hillside construction and access. Many Pacific Palisades homes are built on slopes, with chimneys set back from the street or tucked behind mature landscaping. Getting equipment to the roofline safely takes more time on these properties, and that labor is part of the estimate.
- Older masonry and aging flues. A large share of the housing stock here dates from the mid-20th century, and decades of use leave mortar joints eroded and clay flue tiles cracked. Tile cracks are the most common reason a chimney moves from a cheap HeatShield resurfacing into a full DuraFlex relining.
- Dry seasonal conditions. Pacific Palisades sees long dry stretches through much of the year. Creosote builds up fast in a chimney that sees regular fires and infrequent sweeping, and heavy creosote deposits raise the risk of a flue fire, which is what turns a small repair into a structural one. Seasonal sweeping keeps the repair bill down.
- Chimney height and flue length. The taller the stack, the more liner it takes and the more time it takes to install. A liner on a two-story chimney in Pacific Palisades is priced higher than the same liner on a single-story home.
- Crown and cap condition. The crown is the concrete top of the chimney, and it takes the weather. When it cracks, water gets in and the whole stack suffers. A crown rebuild with a proper Gelco cover is one of the cheapest ways to prevent a much larger repair.
- Diagnostic scope. An inspection that checks the flue, firebox, damper, crown, and cap fully is a different job than a quick visual glance. We treat inspection as its own service so you know exactly what needs fixing before anyone quotes a repair.
If you want the full picture of how we approach the diagnostic step, our Chimney Sweep Pacific Palisades page covers what a thorough sweep and inspection involves. That visit is usually where the repair list starts.
How to Save on Chimney Repair
There are real ways to keep a chimney repair bill in Pacific Palisades from climbing, and most of them come down to catching problems early and choosing the right repair method rather than the biggest one.
- Get an inspection before you agree to a repair. If a quote comes without a diagnostic visit, it’s a guess. We inspect first and recommend second, which means you know whether you need a $600 resurfacing or a $4,000 relining before you commit. Ask for the inspection to be booked on its own; it doesn’t have to be attached to a sweep.
- Ask whether HeatShield will work for your flue. When the flue condition allows, HeatShield ceramic resurfacing restores a damaged flue without a full liner replacement. On qualifying chimneys, the savings are substantial. It isn’t right for every flue, but it’s worth asking about first.
- Fix the crown before it takes the stack with it. Crown cracks are cheap to address and expensive to ignore. Water that gets through a cracked crown works into the masonry, and what starts as a $500 crown job becomes a structural repair.
- Keep up with sweeping. Regular sweeping removes creosote and gives a technician eyes on the flue before cracks get serious. Sweeping is cheaper than repairing a flue damaged by a fire.
- Get your written estimate in writing. We price per job by written estimate, so there are no surprises after the work starts. Estimates are free. Call (855) 531-2802 to book one. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
When Is It Cheaper to Repair Instead of Replace a Chimney?
It’s cheaper to repair a chimney when the structure itself is sound and only the flue, crown, or cap needs work. That covers most Pacific Palisades jobs. A full crown rebuild plus a liner installation runs roughly $3,000 to $7,500. Rebuilding a chimney from the roofline up typically starts around $8,000 and climbs fast. If the mortar and brick are intact, repair wins on cost nearly every time.
The decision rests on what inspection finds. Cracks in the flue tile, a spalling crown, a loose cap, damaged mortar joints, a rusted damper: these are all repairable without touching the main structure. What tips a chimney toward replacement is structural failure of the masonry itself, which is less common. On a Pacific Palisades home with a mid-century masonry chimney, repair is the usual answer. If you’re weighing the two, our chimney repair page walks through the repair options in more detail.
Why Chimney Materials Change the Price
The components in a chimney repair do most of the work, and they’re the part homeowners can’t see once the job is finished. We install professional-grade components from DuraFlex, HeatShield, Gelco, Famco, Olympia Chimney, and Copperfield because these are the products certified chimney technicians specify. The alternative is a hardware-store liner or cap that fails early and gets replaced before its time.
DuraFlex flexible liner systems are the professional standard for relining an aging or damaged flue. HeatShield is the ceramic resurfacing system that lets a qualified technician repair a flue without a full liner when conditions allow; we’re certified in its application. Gelco chimney covers, Famco venting components, Olympia Chimney parts, and Copperfield hardware round out the system. When a repair is done with these materials, you’re paying for one job rather than two.
We cover the full chimney system end to end: sweep, liner, crown, cap, firebox. That means we don’t hand off the liner work or the crown work to someone else, so there’s no scope gap between the inspection and the repair. If you need a liner and a crown, both get priced in one estimate. Call (855) 531-2802 for a free estimate and a written quote.
How to Choose a Chimney Repair Professional in Pacific Palisades
A chimney repair is a fire-safety job, not a cosmetic one. The flue carries combustion gases out of the house, and a bad repair can leave those gases going somewhere they shouldn’t. That’s why it’s worth asking a few questions before you hire anyone in Pacific Palisades.
- Do they inspect separately from sweeping? A provider that treats the inspection as a standalone diagnostic can quote the repair honestly without bundling it into a cleaning appointment.
- What brands do they install? If the answer is a generic liner from a home center, that’s a different tier than DuraFlex, HeatShield, or the other professional brands we work with.
- Will the estimate be in writing? Ours is, and the written estimate sets the final price.
- Will they quote the whole system? A flue repair that ignores a cracked crown isn’t finished. Full-system coverage means the crown, cap, flue, and firebox all get checked.
Our technicians have up to 11 years of experience working on chimneys, and the technicians we work with are licensed and insured as their state requires. A proper inspection will confirm whether a repair is the right call or whether the condition of the system means it needs more.
Same-Day Repair
If your chimney is leaking or you’ve noticed a damaged cap or crown, same-day service is possible when scheduling allows. The phone line is answered around the clock, and we dispatch Sunday through Friday, 7am to 7pm. A call placed outside those hours gets booked into the next opening. Call (855) 531-2802 to get on the schedule. Estimates are free, and the price you see is the price set by the written estimate.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Pacific Palisades?
Most chimney repairs in Pacific Palisades cost between $350 and $1,800. Crown and cap work sits at the lower end, HeatShield resurfacing runs $600 to $1,400, and a full DuraFlex relining runs $2,500 to $6,500. Call (855) 531-2802 for a free estimate, and the written estimate will set the final price.
Is it cheaper to repair or replace a chimney?
Repair is cheaper in almost every case. A crown rebuild plus a liner install typically runs $3,000 to $7,500, while a full chimney rebuild from the roofline up usually starts around $8,000. Unless the masonry itself has failed, repair is the lower-cost path. Call (855) 531-2802 to find out which applies to your chimney. The inspection and estimate are free.
How much does a chimney inspection cost in Pacific Palisades?
A diagnostic chimney inspection in Pacific Palisades typically runs $150 to $400. It’s priced as its own service, so it doesn’t have to be bundled with a sweep. It’s the cheapest step in the whole process and the one that tells you what the repair will actually cost. Call (855) 531-2802 to book one.
Can you repair a cracked chimney flue without replacing the liner?
Sometimes yes. When the flue condition allows, HeatShield ceramic resurfacing can seal cracks and restore the flue without a full DuraFlex liner replacement, and that typically costs $600 to $1,400 versus $2,500 to $6,500 for a full relining. Not every flue qualifies, which is why the inspection comes first. Call (855) 531-2802 to find out whether your flue is a candidate.
Can you come today for a chimney leak or damaged crown?
Same-day service is often available when scheduling allows. We answer calls around the clock and dispatch Sunday through Friday, 7am to 7pm, so a call outside those hours gets booked into the next opening. Call (855) 531-2802 for a free estimate. The written estimate sets the price, and there’s no extra charge for a same-day visit.
Get a Free Chimney Repair Estimate in Pacific Palisades
If your chimney needs a crown rebuilt, a cap replaced, or a flue relined, we’ll inspect the full system and give you a written estimate before any work begins. We work with professional-grade components from DuraFlex, HeatShield, Gelco, Famco, Olympia Chimney, and Copperfield, and we cover the whole chimney from the firebox to the cap. Estimates are free. Call (855) 531-2802. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Pacific Palisades market as of 2026. Chimney Sweep Pacific Palisades offers free estimates – call (855) 531-2802.
Written by the team at Chimney Sweep Pacific Palisades.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Mark Mercer"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Carlos Garcia"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Ramon Salazar