Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Beverly Hills, CA
We provide independent Gelco service across Beverly Hills, from the Flats to the hills above 90210. What makes our Gelco work here different is the starting point: in this city, a Gelco chimney that hasn’t burned wood in years still needs eyes on it, because nests, cracked clay tile and seized dampers cause more trouble than creosote does. We inspect first, recommend second, and clean only what needs cleaning. Call (855) 531-2802 for a free estimate. We answer 24/7.
Why Beverly Hills Residents Choose Us for Gelco Service
Gelco caps and components have their own construction, their own fastening patterns, and their own failure points. We know them without leaning on a manufacturer script, because we are an independent shop that services Gelco equipment rather than a dealer tied to one brand’s talking points. If a cap has pulled loose or a damper has seized, we look at the actual condition before we quote anything.
That matters in a city where the fireplace is often part of the architecture. A damaged Gelco cap over an ornate plaster surround needs careful handling, not a ladder and a pry bar. We fit quality parts that match the chimney instead of forcing a universal cap that leaks or rattles. Our technicians have up to 11 years of experience with this kind of work, and the local pro we connect you with is licensed and insured as their state requires. Scheduling is straightforward: tell us what you’ve noticed, and we’ll book a sweep or a standalone diagnostic visit. Nothing gets recommended that you can’t see for yourself in a photo report.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Beverly Hills
These are the Gelco issues that come up most often in this city, and each one has a local cause behind it.
- Cracked clay tile liners. Decades of seismic movement and temperature swings crack the tile inside a Gelco flue. In a Beverly Hills fireplace that burns only a handful of nights a year, nobody notices creosote seeping into the masonry until an inspection turns it up, which is exactly why we treat a level 2 inspection as its own service.
- Seized dampers. The mild climate here means a damper can sit untouched for months. Rust and grit lock it open or closed, and either way you lose control of draft and heat loss. We free it, or we tell you plainly that it’s past saving.
- Hairline cracks in the firebox mortar. Settling in older Spanish Colonial homes opens thin cracks in the refractory mortar around decorative surrounds. Left alone, they widen. Repointing early is a small job; rebuilding is not.
- Missing or damaged caps. This is the big one in Beverly Hills. A cap that’s gone or bent open turns a flue into a wildlife entrance, and the dry season gives birds and squirrels months to move in.
- Nest blockages found at the fall sweep. By the time a homeowner lights the first fire of the season, the flue may already be plugged. We remove the nest, check the liner, and fit a cap so it doesn’t happen again next year.
Gelco Service in Beverly Hills: What Local Conditions Mean for Your Equipment
The 90210 hills are where Gelco chimney work here gets interesting. Mature canyon trees and Spanish Colonial architecture sit side by side, and that combination means the chimneys frequently host bird nests in uncapped flues. The long dry season gives wildlife a wide window to build, and many of these fireplaces stay dark until the first genuinely cool night. So a routine sweep in the hills often starts with nest removal before any brush goes up the flue.
For Gelco owners, that changes the value of the visit. The cap isn’t an accessory; it’s the piece of equipment that keeps the flue clear between seasons. A proper cap fitted to a Gelco chimney also keeps wind-driven leaves and ash from the canyon edges out of the flue, which is a real problem on hillside homes. If your chimney has run uncapped through a dry season, book the inspection before you book the sweep.
Gelco Models & Products We Service in Beverly Hills
We service the Gelco 200 Series, the Gelco 300 Series, and Gelco Custom caps across Beverly Hills. Different chimneys need different answers: a flue on a rebuilt custom home isn’t the same as one on a 1930s masonry stack, and the cap has to suit both the flue size and the way the crown is built. We repair, install and service Gelco equipment with parts that fit it properly. When a cap is beyond repair, we’ll say so and recommend a modern equivalent rather than patching something that will fail again. We’ll also tell you when the existing cap is sound and nothing needs doing. That’s part of the job too.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Beverly Hills
Every price here is set per job by the written estimate, so treat these as typical ranges rather than quotes. A standard sweep with a visual check usually runs $225 to $450. A level 2 inspection, which includes camera work and a photo report, is typically $275 to $550. Cap installation on a Gelco chimney falls around $250 to $650 depending on the cap and the crown. Repointing cracks in a firebox surround runs $400 to $1,200. The estimate is free, and you get the photo report before you agree to any work, so you can verify what we found.
Cost moves with access, flue condition, and how much nest material or debris we’re removing. It doesn’t move with how urgent you think it is. Nothing gets recommended without camera evidence you can look at yourself, and if the work can safely wait, we’ll tell you that. Call (855) 531-2802 for an exact quote.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Beverly Hills
Once a year is the right rhythm for a Gelco chimney here, even when the fireplace barely gets used. Light burning means less creosote, but it also means problems go unnoticed for longer, which is why animal nests, liner cracks and damper seizure tend to show up at an annual inspection rather than between them. Call (855) 531-2802 to book one.
A musty smell from a Gelco fireplace usually points to moisture or debris sitting in the flue, and in Beverly Hills the most common cause is nesting material or a cap that’s failed and let water in. A camera inspection finds the source instead of guessing at it. Call (855) 531-2802 and we’ll schedule a diagnostic visit.
Often yes. Hairline cracks in the refractory mortar around a Gelco firebox can usually be repointed if the surrounding masonry is sound, which saves the surround and the plaster around it. We inspect the full firebox first and tell you honestly whether repointing will hold. Call (855) 531-2802 for an estimate.
The best cap is one sized to your actual flue and fitted so it stays put through wind coming off the canyon edges. For a Gelco chimney, that means matching the cap to the crown and the flue dimensions rather than grabbing a universal fit. We’ll show you the options and explain the trade-offs. Call (855) 531-2802.
They need the right brushes and fittings for the flue size and the cap style, and the work has to be done without damaging the surround. That’s why a Gelco sweep here is as much an inspection and documentation job as a cleaning job. Call (855) 531-2802 to book one.
Service Areas Near Beverly Hills
We also handle Gelco service in the neighborhoods around Beverly Hills, including Pacific Palisades, Santa Monica, Brentwood, Westwood and West Hollywood. If you’re just outside the city line, tell us where you are and we’ll confirm coverage. For more on our work across the area, see our Beverly Hills service page and our Gelco brand page.
Book Your Gelco Service in Beverly Hills Today
Whether it’s a fall sweep, a cap replacement, or a standalone level 2 inspection you can review before any work is agreed, we’ll give you a straight answer about what your Gelco chimney actually needs. Call (855) 531-2802 for a free estimate. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. Closed Saturday.
Written by the team at Chimney Sweep Pacific Palisades.