Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Beverly Hills
If you live in Beverly Hills and your chimney crown is crumbling or your cap is missing, the fix usually takes a single visit and a written estimate you approve first. We handle cap installation, cap replacement, crown repair, and crown coating for the estates, Spanish Colonial homes, and hillside properties throughout Beverly Hills. Cap and crown work just gets trickier here: ornate plaster, tile, and high-value interiors mean every job is staged with care, and hillside flues draw birds and squirrels when they sit uncapped. Call (855) 531-2802 and we’ll book a sweep or an inspection with camera documentation. We answer 24/7, and fast dispatch runs 7am to 7pm.
Why Beverly Hills Homeowners Call Chimney Sweep Pacific Palisades for Chimney Cap & Crown
We work with independent local chimney professionals who handle the full chimney system, and Beverly Hills is one of the areas where that matters most. The homes we see there tend to be older, the fireplaces are often grand design features that get used only a few nights a year, and the surrounding materials are the kind a careless job can scuff or stain. Our technicians have up to 11 years of experience, and we treat the crown and cap as structural, not cosmetic. That means we inspect before we recommend anything, and we show you the evidence rather than describing it.
Beverly Hills homeowners call us because we work with professional-grade components, including Famco venting products, Gelco chimney covers, DuraFlex liner systems, and HeatShield ceramic resurfacing. The local pro we connect you with is licensed and insured as their state requires, and the work is covered end to end: inspection, sweeping, cap-and-crown installation, and structural repair, all under the same provider. If you need a diagnostic-only visit, we offer that as a standalone inspection, separate from cleaning.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Beverly Hills
Every cap and crown job starts the same way: a proper look at the top of the stack, the flue tile, and the mortar around it. Here’s what we cover when we get up there.
Cap Installation
A correct cap keeps rain, birds, and squirrels out of the flue while letting smoke escape. On the uncapped hillside flues common around the canyon edges of Beverly Hills, we routinely see nesting debris by fall, so a properly sized cap is often the most useful single step for those chimneys. We measure the flue and match the cap to it rather than guessing a size. A custom cap is specified and fitted to that flue.

Cap Replacement
Rusted, corroded, or loose caps lose their protection over time, especially when the long dry season lets sun and canyon wind work on the metal. We replace single-flue and multi-flue caps and check that the new one sits correctly over the flue tile. A multi-flue cap is fitted over each flue it covers, sized to the stack.

Crown Repair
A cracked crown lets water soak into the masonry, and that’s where trouble starts in older Beverly Hills homes. We break out failing mortar and rebuild the crown so it sheds water away from the flue instead of into it. When we find clay-tile flue damage at the same time, we document it on camera and show you before recommending any further work.

Crown Coating
For crowns that are still sound but weathered, a crown coating can seal the surface and slow deterioration. When conditions allow, we use HeatShield ceramic resurfacing for the flue itself, an industry-recognized repair method that helps fix an aging flue without a full liner replacement. Crown coating buys time on a crown that’s aging but not yet due for a rebuild.
Trusted Brands We Service in Beverly Hills
We handle professional-tier chimney components: DuraFlex liner systems, HeatShield ceramic resurfacing, Gelco chimney covers, Famco venting products, and Copperfield components. These are parts a certified chimney professional would install, not hardware-store substitutes. We source them per job rather than stocking them, and we coordinate timing with the local pro so your cap, crown, or liner work moves without unnecessary holds. If you already have a particular brand on your chimney, we’ll work with what’s there and tell you honestly when a component has reached the end of its service life. That’s the practical part of full-system chimney service.
Common Chimney Cap & Crown Problems We See in Beverly Hills Homes
Here’s the local pattern. In Beverly Hills, most masonry fireplaces burn only a handful of nights a year, so creosote is usually modest. The cap and crown, by contrast, take the brunt of UV, canyon wind, and nesting activity through the long dry season before anyone lights a fire. That changes what needs attention and what can safely wait.
- Original 1920s – 1930s clay-tile flues with no liner. A cracked crown lets water into the masonry, and the damage is often blamed on the flue before anyone looks at the crown. We check the crown first because that’s where the water usually gets in.
- Uncapped hillside flues that draw birds and squirrels. Birds and squirrels nest in open flues during the dry season, so a fall sweep often becomes nest removal and cap-fitting before the first cool night. An uncapped stack also shows up as a blocked or foul-smelling chimney.
- Oversized decorative masonry fireplaces vented through undersized stacks. Grand living-room fireplaces in the Flats sometimes sit on stacks that were never designed for the appliance. That’s why we size caps and set crown height from measured documentation, not a guess.
- Crowns that have spalled for years under Southern California sun. The Mediterranean climate means occasional winter burning and months of dry heat, and the crown takes that weathering while the flue stays relatively clean. Spalling mortar often looks fine from the ground and is obvious once you’re on the roof.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Beverly Hills, CA
Typical estimated ranges for Beverly Hills: a standard cap installation runs $250 – $550, a multi-flue cap $450 – $900, crown repair $500 – $1,400, and crown coating $200 – $450. Custom caps sized to an unusual flue or decorative stack often land in the upper half of those ranges. What drives cost is access to the roof, the size and number of flues, how much spalled mortar has to come out, and whether the crown needs a full rebuild or just coating. The written estimate sets the final price, and the estimate itself is free. Nothing on that estimate is added without camera evidence you can see for yourself, and we’ll tell you plainly when a problem can safely wait.
We Also Serve Cities Near Beverly Hills
Along with Beverly Hills, we serve homeowners in West Hollywood, Westwood, Culver City, and Brentwood, plus the surrounding westside neighborhoods. If you’re on the edge of town, it’s worth calling to confirm coverage and timing. Our Beverly Hills service area includes the Flats and the hillside streets, and we treat every job with the same inspect-first approach. Wherever you are in the area, reach out and we’ll get you on the schedule.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Beverly Hills
Hairline cracks in a crown usually aren’t an emergency, but they do get worse, and water reaching the masonry is what turns a small crack into a larger repair. If the crack is letting water in or the mortar around the flue is failing, it’s worth addressing before the wet season rather than after. A camera inspection tells us whether it can wait or needs work now, and we’ll say so plainly. Call (855) 531-2802 for an exact quote; estimates are free.
Yes, and honestly a light-use fireplace is one of the best reasons to inspect, because there’s less creosote to signal a problem from the inside while the crown and flue can still be degrading on the outside. In Beverly Hills, most of what we find on lightly used fireplaces is damaged crown, cracked flue tile, or nesting debris in an uncapped flue. A standalone diagnostic visit, separate from cleaning, catches all of it with camera footage you can watch. Call (855) 531-2802 to book one.
You know because we show you, not tell you. The pro runs a camera inspection and presents the footage of the crown, flue, and cap before recommending anything, so you’re looking at the condition yourself. If your cap doesn’t need replacing, we say so, and if a repair can safely wait, we tell you that too. That’s the standard we hold on every Beverly Hills job. Call (855) 531-2802 for an exact quote; estimates are free.
A correctly sized cap shouldn’t hurt your draft, and a correctly matched one can help because it keeps debris and animals from blocking the flue in the first place. A wrong-sized or poorly fitted cap can restrict airflow, which is exactly why we measure the flue before specifying a cap. If your fireplace already drafts poorly, the inspection will show whether a blocked or undersized flue is behind it. Call (855) 531-2802 for an exact quote; estimates are free.
No. Staging to protect ornate surrounds, plaster, and art is part of how we run these jobs, not a line item. Beverly Hills fireplaces frequently have decorative plaster or tile surrounds, so drop cloths and careful staging are standard on the work. If an interior needs more protection than usual, we work it into the plan before the job starts rather than surprising you afterward. Call (855) 531-2802 for an exact quote; estimates are free.
Get Your Beverly Hills Chimney Cap & Crown Handled Right
If your crown is cracking, your cap is missing or rusted, or you’ve seen birds and squirrels around an uncapped hillside flue, the first step is a proper look with camera evidence. Our local pros handle the full chimney system, from inspection and sweeping through crown repair, custom caps, and multi-flue caps, and there’s no scope gap to hand you off to someone else. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 531-2802 for a free estimate on chimney cap and crown work in Beverly Hills, and see the footage before you decide anything.
Written by the team at Chimney Sweep Pacific Palisades.