Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Brentwood
Brentwood homeowners call us about chimney caps and crowns for one of two reasons: water is getting in, or an inspector told them something on the roof needs to change. We work on both, and we do it across Brentwood – from the canyon streets off Mandeville and Sullivan Canyons up to the ridge homes south of Sunset. Caps and crowns are small parts of a chimney with outsized jobs. The cap keeps rain, animals and embers where they belong. The crown sheds water away from the flue so the masonry below doesn’t soak and crack. Get either wrong on a hillside home and you find out the following winter.
Chimney cap and crown work in Brentwood typically runs $450 – $1,900 depending on whether we’re repairing, coating or rebuilding a crown and whether the cap is a stock single-flue model or a custom multi-flue build. We inspect first, recommend second, and back every recommendation with camera evidence you can watch on-screen. Call (855) 531-2802 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Brentwood Homeowners Call Chimney Sweep Pacific Palisades for Chimney Cap & Crown
Brentwood sits in the Santa Monica Mountains’ wildland-urban interface, and that changes what a chimney problem actually is here. In a flatland LA neighborhood, a missing spark arrestor is a nuisance. In the canyon streets off Mandeville and Sullivan Canyons, it’s a brush-ignition vector. A cracked crown on a canyon home isn’t just a water-damage issue either – it’s a gap in the fire-safety envelope an insurance inspector may flag before you ever pick up the phone. We build every cap and crown recommendation around that reality, not around a generic checklist.
Most of the chimneys we see in Brentwood were built for decorative fireplaces, not heavy wood heating. That means less soot volume than you’d expect, and more of the slow structural stuff – settled crowns, spalled mortar, open clay tile joints – that only turns up on camera. We carry the professional-grade component lines that hold up here: Gelco chimney covers, Olympia Chimney caps, Famco venting products, and HeatShield when the flue itself needs resurfacing. Our technicians have up to 11 years of experience working the full chimney system. Nothing gets recommended without a Level 2 camera inspection to back it up, and nothing gets recommended that the camera doesn’t prove.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Brentwood
We treat cap and crown work as part of the full chimney system, not a cosmetic add-on. Here’s what each service covers when we work in Brentwood.
Cap Installation
A proper cap keeps water out of the flue and keeps sparks and embers in. On Brentwood hillside ranches with a single flue, a stock Gelco cover with a spark arrestor screen does the job cleanly. On the split-levels and rebuilds we see south of Sunset, a multi-flue or custom cap often makes more sense because the masonry top doesn’t fit a standard footprint. We size the cap to the actual flue opening and the draft, not to whatever’s on the shelf.

Cap Replacement
Rusted-out or missing caps are common on canyon homes that have taken decades of wind and weather. We pull the old cap, check the flue top and mortar for damage while we’re up there, and fit a replacement rated for the exposure. If the old cap was the wrong size and the flue has been running wet for years, we’ll show you what the camera sees before we quote anything else.

Crown Repair
The crown is the concrete or mortar cap on top of the chimney that sheds water away from the flue. On 1950s – 1970s Brentwood masonry chimneys, decades of settling and seismic movement typically leave it cracked. We repair the crown with a proper overhang and slope so water runs off the masonry rather than into the flue joints. When the crown is compromised but still structurally sound, a repair or rebuild stops the water intrusion at the source.

Crown Coating
When the crown is intact but porous, a coating seals it against water penetration without the cost of a full rebuild. We use coating systems matched to the masonry and the local climate. This is the right call when the crack pattern is surface-level rather than structural – and the wrong call when the crown has broken apart. The camera and a careful look from the roof tell us which.
Trusted Brands We Service in Brentwood
We work with professional-tier chimney brands, not hardware-store substitutes. Gelco chimney covers and Olympia Chimney caps handle the top of the system. Famco venting products cover the cap-and-flue interface. HeatShield ceramic resurfacing is what we use when the flue itself needs sealing without a full reline. These are components specified by certified chimney professionals, which is why we keep to them. We don’t claim to stock parts locally – we source and install the right component for the job. If your chimney already has one of these systems, we can service it or replace a worn part with a matching component. For the broader picture on caps and crowns, our chimney cap & crown team can walk you through what each part does.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Brentwood Homes
- Cracked, settled crowns on 1950s – 1970s masonry chimneys. Decades of settling and seismic movement open the crown, and winter rain weeps down the flue, freeze-thawing the mortar and widening the gaps between clay tiles.
- Missing or rusted-out spark arrestors on canyon homes. With chaparral tinder-dry for months and Santa Ana wind events pushing embers, a missing arrestor is a genuine wildfire risk, not a cosmetic complaint.
- Decorative fireplaces now venting gas appliances and inserts. Flues that were sized for a decorative firebox don’t draft properly for a gas appliance, producing creosote that brushes off as first-degree but hides glazed third-degree deposits below.
- Undersized or wrong-fit caps on rebuilds. Later rebuilds with prefab metal flue systems need a cap matched to the factory flue, not a generic masonry-style cover that leaks around the edges.
Pricing for Chimney Cap & Crown in Brentwood, CA
These are typical estimates for Brentwood’s market. The written estimate sets the final price, and the estimate itself is free.
| Service | Typical Brentwood Range |
|---|---|
| Stock single-flue cap installation | $450 – $750 |
| Multi-flue or custom cap | $750 – $1,400 |
| Crown coating | $500 – $900 |
| Crown repair or rebuild | $900 – $1,900 |
| Full cap-and-crown package | $1,100 – $2,300 |
What moves the price: the number of flues, the condition of the masonry top, whether the cap is stock or custom-built to the footprint, and whether the crown needs a coating or a full rebuild. Winter rain damage that’s been running for years costs more to correct than a fresh crack does. We’ll show you the camera footage and give you a written estimate before any work starts.
We Also Serve Cities Near Brentwood
We work the whole Westside, not just Brentwood. If you’re in Westwood, Santa Monica, Pacific Palisades or Beverly Hills and you’re dealing with a crown that’s cracked or a cap that’s gone missing, we can get out to you. Our cap and crown team covers the full system across these neighborhoods. Canyon work and hillside masonry are what we do most, and the same inspection-first approach applies wherever you are.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Brentwood
Yes, if you want the cap replacement to actually solve the problem. A cap covers the flue top, but if the crown under it is cracked or the tile joints are open, the cap won’t stop water from getting into the masonry. A Level 2 camera inspection shows what’s happening inside the flue before we quote a cap. If the camera shows the flue is sound and only the cap is worn, that’s all we’ll recommend. Call (855) 531-2802 for a free estimate.
Wind exposure and decades of weather. Canyon homes off Mandeville and Sullivan Canyons take more sustained wind than flatland Brentwood, and caps with arrestor screens rust out or work loose over time. A missing arrestor here isn’t cosmetic – with chaparral tinder-dry and Santa Ana winds in play, embers escaping the flue are a real wildfire vector. Insurance inspectors increasingly flag it. We can check and replace an arrestor cap as part of a cap-and-crown visit.
It can be, and it often turns out to be the flue itself rather than the firebox. Decorative fireplaces were built for light use, and the clay tile flues in them weren’t always sized or maintained for gas appliances or inserts later installed. That produces weak draft and creosote that brushes off as first-degree but hides glazed third-degree deposits below. A camera inspection tells you what’s actually there. Call (855) 531-2802 and we’ll take a look.
You can’t tell from the firebox, and a surface brush doesn’t show it. First-degree creosote looks like soot and brushes off easily. Third-degree creosote is glazed and hard, and it fuels chimney fires. The only reliable way to tell the difference is a camera inspection inside the flue. We show you the footage on-screen so you can see what we’re seeing. Call (855) 531-2802 for a free estimate on an inspection.
A coating seals a crown that’s intact but porous – it stops water penetration on a crown that’s structurally sound. A repair or rebuild replaces the broken section with a properly sloped, overhanging crown that sheds water away from the masonry. The choice depends on whether the crown is cracked at the surface or broken apart at the structure. We use the camera and a close look from the roof to decide, and we’ll recommend the coating when a rebuild isn’t needed. Call (855) 531-2802 for a free estimate.
If you’re ready to sort out a cap or crown that’s been worrying you, call (855) 531-2802 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect first, show you what the camera sees, and recommend only what needs doing.
Written by the team at Chimney Sweep Pacific Palisades.