Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Pacific Palisades?
Chimney liner and rebuild work in Pacific Palisades typically runs $1,850 to $6,900, with a full stainless flexible reline landing around $2,400 to $4,200 and a partial crown-and-cap rebuild around $1,100 to $3,200. Small liner repairs, including HeatShield ceramic resurfacing where the flue qualifies, usually fall between $900 and $1,800. Every job is priced per chimney by a written estimate, so the ranges here are typical planning figures, not a quote.
Homes here tend to be older and built around a masonry fireplace, and many flues have gone decades since anyone looked inside them. We inspect first and recommend second, so you know whether you’re facing a repair or a rebuild before any money changes hands. Call (855) 531-2802 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Full stainless reline in Pacific Palisades: roughly $2,400 to $4,200 for a single-story chimney.
- HeatShield ceramic resurfacing can repair a worn flue for far less than a full liner when the chimney qualifies.
- Crown and cap work is the most common rebuild trigger we see: $1,100 to $3,200 for a partial rebuild.
- Two-story and steep-roof access push labor up, since scaffolding and safer work positions add cost.
- We install DuraFlex liner systems and HeatShield with professional-grade materials, not hardware-store substitutes.
Chimney Liner & Rebuild Cost Breakdown (2026)
The table below gives typical Pacific Palisades ranges for the liner and rebuild work we handle. Think of it as a starting map. Your written estimate sets the final number, and it’s free.
| Line item | Typical range (Pacific Palisades) | Notes |
|---|---|---|
| Chimney inspection (diagnostic-only visit) | Free with estimate / bundled on repair jobs | Booked independently of a sweep; video scan of the flue where needed |
| HeatShield ceramic flue resurfacing | $900 – $1,800 | Repairs a worn or cracked flue without full relining when conditions allow |
| DuraFlex stainless flexible reline (single-story) | $2,400 – $4,200 | Professional standard for aging or damaged flues |
| DuraFlex reline (two-story / offset flue) | $3,600 – $6,200 | Offset or oversized flue raises material and labor |
| Cap replacement only | $220 – $550 | Gelco or Copperfield cap, material-dependent |
| Crown repair (patch) | $450 – $900 | Addresses surface cracking before water gets into the masonry |
| Crown rebuild | $1,200 – $2,600 | Full replacement of a failed crown |
| Cap and crown partial rebuild | $1,100 – $3,200 | The most common rebuild scope we price |
| Upper masonry rebuild (chimney top) | $2,800 – $6,900 | Removing deteriorated brick and rebuilding the top courses |
| Firebox or damper repair | $350 – $1,400 | Fireplace repair priced separately from flue work |
Two things push these numbers up. The first is access. Pacific Palisades homes often sit on sloped lots or have tall, steep roofs, so getting safely to the chimney top takes more time and equipment than a flat-roof house. The second is flue geometry. A straight, single-story flue relines easily; an offset flue in an older canyon-area house with an oversized opening takes more DuraFlex length and more hours. The material tier matters too, and that’s where we don’t cut corners: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield are the professional-grade brands we work with, and cheaper substitutes are how a repair turns into a callback.
What Affects Chimney Liner & Rebuild Pricing in Pacific Palisades
- Chimney height and story count. A single-story chimney relines for less than a two-story one because the liner run is shorter and the work can often be done from a safer position.
- Roof pitch and lot slope. Pacific Palisades homes on hillside lots and steeper rooflines need more careful access, which adds labor hours rather than a flat markup.
- Flue condition and geometry. Cracks, gaps, offsets and oversized flues mean more material and more time. HeatShield resurfacing is often an option exactly when the flue is sound enough to hold it.
- Whether you’re repairing or rebuilding. A crown patch or a cap swap is a small job. Rebuilding the upper masonry is a bigger one because brick has to come out and go back.
- Material and brand tier. Professional-grade DuraFlex liner systems and HeatShield cost more up front than retail substitutes, but they’re built to last, not patched to pass.
- Whether inspection is booked separately. A diagnostic-only inspection lets you price a repair on real information instead of a guess, and it often reveals that a cheaper repair is possible.
If you want the flue checked before you commit to anything, start with a chimney sweep in Pacific Palisades that includes an inspection report, or book a diagnostic-only visit and decide from there.
How to Save on Chimney Liner & Rebuild in Pacific Palisades
The biggest savings in this trade come from catching a problem early. A cracked crown that gets patched for a few hundred dollars today can mean rebuilding masonry later. Here’s how to keep the number down without trading away safety.
- Get the diagnostic before the repair talk. We inspect first and recommend second, so you’re pricing a real scope rather than a worst-case guess. A diagnostic inspection can reveal that HeatShield resurfacing will fix a worn flue for a fraction of a full reline.
- Fix the crown while it’s small. A crown patch in the $450 to $900 range is far cheaper than a crown rebuild, and much cheaper than rebuilding the chimney top once water has worked into the masonry.
- Don’t skip the cap. A properly fitted Gelco or Copperfield cap keeps animals, debris and rain out of the flue and is the least expensive line item on the whole page.
- Bundle related scope into one written estimate. When cap, crown and liner work are priced together, the access cost is shared instead of paid twice.
- Compare quotes on scope, not just price. Ask whether the quote includes a stainless DuraFlex liner, HeatShield where applicable, and a cap. Apples-to-apples quotes are the honest way to compare.
The estimate itself is free, so there’s no reason to guess. Call (855) 531-2802. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Pacific Palisades?
Most full stainless relines in Pacific Palisades land between $2,400 and $4,200 for a single-story chimney, and $3,600 to $6,200 for a two-story or offset flue. The lower end covers a straight, accessible flue; the upper end covers more DuraFlex length and tougher access. Call (855) 531-2802 for an exact quote, since estimates are free.
Is it cheaper to repair the flue or replace the liner?
Repair is almost always cheaper when the flue qualifies. HeatShield ceramic resurfacing typically runs $900 to $1,800, against $2,400 to $4,200 for a full DuraFlex reline, so if the flue is sound enough to hold the coating, resurfacing saves real money. If the flue is badly deteriorated or has gaps, a reline is the honest answer. Call (855) 531-2802 and we’ll tell you which applies to your chimney, with a free estimate.
How much does a chimney crown rebuild cost in Pacific Palisades?
A full crown rebuild typically runs $1,200 to $2,600, and a partial cap-and-crown rebuild runs $1,100 to $3,200. A small crown patch is much less, in the $450 to $900 range. Call (855) 531-2802 for a free estimate so we can price your crown honestly.
Can you come the same day for a chimney problem?
Yes, same-day service is often available, and the price doesn’t change based on timing. The written estimate sets the cost per job either way, whether we’re out quickly or booked for the next opening. Call (855) 531-2802. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Does a chimney rebuild really cost more than a liner?
Yes. Rebuilding the upper masonry runs $2,800 to $6,900, well above a reline at $2,400 to $4,200, because brick has to be removed and rebuilt rather than sleeved. The good news is that a rebuild is often avoidable if a failed crown or cap is caught early. Call (855) 531-2802 for a free estimate and a straightforward read on what your chimney actually needs.
Why Get a Written Estimate First
Chimney liner and rebuild pricing varies too much from chimney to chimney for a phone guess to be useful. A flue that looks straightforward from the ground can turn out to have an offset, a cracked crown or an oversized opening that changes the scope. That’s why we look before we quote. Our technicians have up to 11 years of experience, and the diagnostic inspection is a standalone service, not a tacked-on upsell to a sweep, so you get a clear picture of the whole chimney: flue, crown, cap, firebox, all of it.
The purpose of an inspection isn’t to sell you the biggest job. It’s to tell you which repair is right. Plenty of Pacific Palisades chimneys need only a crown patch and a new cap. Others need a DuraFlex reline to bring an old flue up to current safety performance. And some qualify for HeatShield resurfacing rather than a full liner. Getting that call right saves money. Getting it wrong, either by doing too much or too little, is what costs you later.
When we do the work, we install professional-grade components: DuraFlex for relining, HeatShield for flue resurfacing, Gelco and Copperfield for caps and components, Olympia Chimney and Famco for venting. If your chimney is older and these brand names are unfamiliar, the short version is that they’re the materials licensed chimney professionals use, not the box-store alternatives that fail early.
Chimney Liner & Rebuild vs. Patching: What Actually Lasts
There’s a real difference between a repair that keeps a chimney safe and one that just gets it through another season. A patch over a failed crown hides the problem; the crown still lets water in, and the masonry below keeps deteriorating. A full crown rebuild stops it. The same logic applies to the flue. A cheap liner substitute in an aging flue can fail at temperature, and a heat-rated stainless DuraFlex system is what makes the chimney fire-safe and code-ready. We’re not interested in patched-to-pass work. The point of a liner or a rebuild is a chimney you don’t have to think about again for a long time.
That approach shapes how we scope a job. If a flue checks out and HeatShield will hold, that’s what we recommend, because it’s less invasive and less costly. If the flue is too far gone for resurfacing, a DuraFlex reline is the durable option. The estimate reflects which of those applies, and it’s put in writing before any work starts. You can read more about the full range of work on our chimney liner & rebuild page, and if you’re starting from scratch, a chimney sweep and inspection visit is the sensible first step.
When to Book the Estimate
If your fireplace has smoked back into the room, if you smell creosote or musty air when the fire’s not lit, if the crown is visibly cracked, or if the cap is missing or damaged, it’s worth a look. Any one of those can point to a liner or rebuild cost you’d rather catch now than after the masonry fails. A camera inspection tells you which. The written estimate sets the number.
Call (855) 531-2802. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. Estimates are free, and the price is set per job by the written estimate. We’re closed Saturday, so a Friday or Sunday call reaches us and we’ll book you into the next opening.
Written by the team at Chimney Sweep Pacific Palisades.
Pricing reflects the Pacific Palisades market as of 2026. Chimney Sweep Pacific Palisades offers free estimates – call (855) 531-2802.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Mark Mercer"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Carlos Garcia"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Ramon Salazar